>
Produkt >
Elektronische Produkte >
Verkabelung des Controller-Systems >
Schnittstellenmodul >
Interface module-DM50-DBJ-09-09-4Y-00A(H)
.jpg)
Interface module-DM50-DBJ-09-09-4Y-00A(H)
30040000001
D-SUB module,input/output module,with screw connector and D-SUB female connector,can be installed on DIN35 rail,9 positions
channels
- 9
- 15
- 25
- 37
- 50
current
- 2A
width of panel
- 50mm
- 72mm
- Überblick
- Technische Daten
- Zubehör
- Zertifizierung
- Die Geschäftsdaten
- Download
Produktvorteile
9digits to 50digits1:1 connection
Screw connection
- 3D-Modell
- Dimension
- Environmental data
- Standards/Regulations
- Technical data
- Connection data 1
- Connection data 2
3D-Modell
Dimension
| length | 65.5mm |
| width | 57mm |
| Height | 31mm |
Environmental data
| Ambient temperature (operation) | -20 °C ... 70 °C |
| Ambient temperature (storage / transport) | -20 °C ... 70 °C |
Standards/Regulations
| Standards/Regulations | IEC61810 |
| Pollution level | 3 |
| Overvoltage category | Ⅲ |
| Rated overvoltage | 0.5kV |
| Flame retardant grade, in line with UL94 | V0 |
Technical data
| Installation location | Arbitrary |
| Maximum allowable working voltage | 30VDC |
| Maximum allowable current | 2A |
| Signal points | 9 |
| Status Display | no |
Connection data 1
| Connection name | Control system side |
| Connection method | D-SUB connection |
| Connection volume | 1 |
| Number of digits | 9 |
| spacing | 2.77mm |
Connection data 2
| Connection name | On-site side |
| Stripping length | 6-7mm |
| Cross section of flexible conductor | 1.0 mm² ... 2.5 mm² |
| Connectable guide cross section AWG | 28-12AWG |
| Connection meets standards | UL1059 |
| Connection method | Screw connection |
| Connection volume | 1 |
| Number of digits | 10 |
| screw thread | M3 |
| Hard wire cross section | 1.0 mm² ... 2.5 mm² |
| Nummer der Bestellung | 30040000001 |
| Verpackung Einheit | 6 |
| Minimale Bestellmenge | 12 |
| Produktgewicht (ohne Verpackung) | 80 |
Passende Teile
- Alle Unterstützenden Produkte（0）
- Verwandte Produkte（3）
Nach Produktparametern Filtern
Horn Interface Module-barrier terminal blocks
FCN module, input/output module, with screw connection and FCN pin row, can be installed on DIN35 rail
MDR Interface Module
MDR module, input/output module, with screw connection and MDR connector, can be installed on DIN35 rail, 20-50 positions
FCN Interface Module
I/O Interface Module, can access binary or ternary NPN signal, with indicator light, with screw connection, can be installed on DIN35 rail, 8/16 bit